🎬 Video Lecture 📊 Presentation Slides 📝 Practice Quiz 📁 Unit 2 Hub
Episode 2.3

DEMYSTIFYING NETWORKS

Class 10 (X) • Unit 2: Network and Internet Concepts

💡 Direct Stream: You can also watch directly on YouTube or via local server: 📺 Watch on YouTube.com
Episode code: 2.3
📊 Slide Deck 📝 Take Quiz
⬅️ Previous Episode 🏠 Unit Overview Next Episode ➡️

✍️ Episode 2.3 Topic Notes

📌 2.1 Architecture & Physical Layout

  • Drop Lines: Shorter cables running from the central backbone to individual workstations.
  • BNC T-Connectors: Cylindrical 3-way coaxial connectors used to tap drop lines into the continuous trunk line.
  • Terminators (50-Ohm Resistors): Installed at both physical ends of the backbone cable. Terminators absorb electrical signal energy when it reaches the cable ends, preventing signal reflection (echoes) that would otherwise bounce back and corrupt ongoing data transmissions.

📌 2.2 Operational Characteristics

  • Broadcast Transmission: When Node A sends data destined for Node C, the signal travels in both directions along the trunk cable. Every workstation on the bus examines the destination address in the packet header. Only Node C processes the data; all other nodes discard it.
  • Shared Bandwidth & Collisions: Because all devices share one wire, only one device can transmit at a given instant. If two transmit simultaneously, a collision occurs.

📌 3.1 Architecture & Physical Layout

  • Cabling Standard: Unshielded Twisted Pair (UTP Cat5e / Cat6) cables terminated with 8-pin RJ-45 connectors.
  • Point-to-Point Links: Each computer has an isolated physical link directly to a dedicated port on the central switch.

📌 3.2 Operational Characteristics

  • Dedicated Port Connections: In modern switched star networks, each port operates in Full-Duplex mode. The central switch reads the destination MAC address of incoming frames and forwards them exclusively to the specific target port, eliminating collisions.
  • Hub vs Switch in Star: An older hub simply repeats incoming signals out of all other ports (acting as a physical star, logical bus). A modern switch maintains an internal MAC address table for intelligent, wire-speed packet forwarding.